Reference Guide (Supporting software release 5.5.0.0 and later) Owner manual

Brocade Mobility RFS Controller CLI Reference Guide 403
53-1003098-01
5
service load-balancing clear-client-capability [<MAC>|all] {on <DEVICE-NAME>}
service locator {<1-60>} {(on <DEVICE-NAME>)}
service radio <1-3> dfs simulate-radar [extension|primary]
service radius test [<IP>|<HOSTNAME>] <WORD> <USERNAME> <PASSWORD> {wlan
<WLAN-NAME>
ssid <SSID>} {(on <DEVICE-NAME>)}
load-balancing Enables wireless load balancing by clearing client capability records
clear-client-capability
[<MAC>|all]
Clears a specified client or all client’s capability records
• <MAC> – Clears capability records of a specified client. Specify the client’s MAC address in the
AA-BB-CC-DD-EE-FF format.
• all – Clears the capability records of all clients
on <DEVICE-NAME> Optional. Clears client capability records on a specified device
• <DEVICE-NAME> – Specify the name of the AP, wireless controller, or service platform.
locator Enables LEDs
<1-60> Sets LED flashing time from 1 - 60 seconds.
on <DEVICE-NAME> The following keyword is recursive and common to the <1-60> parameter:
• on <DEVICE-NAME> – Optional. Enables LEDs on a specified device
• <DEVICE-NAME> – Specify name of the AP, wireless controller, or service platform.
radio <1-3> Configures radio’s parameters
• <1-3> – Specify the radio index from 1 - 3.
dfs Enables Dynamic Frequency Selection (DFS)
simulate-radar
[extension|primary]
Simulates the presence of a radar on a channel. Select the channel type from the following options:
• extension – Simulates a radar on the radio’s current extension channel
• primary – Simulates a radar on the radio’s current primary channel
radius test Tests RADIUS server’s account. This command sends an access-request packet to the RADIUS server. Use
this command to confirm time and data/bandwidth parameters for valid wireless clients.
• test – Tests the RADIUS server’s account with user provided parameters
[<IP>|<HOSTNAME>] Sets the RADIUS server’s IP address or hostname
• <IP> – Specifies the RADIUS server’s IP address
• <HOSTNAME> – Specifies the RADIUS server’s hostname
<WORD> Specify the RADIUS server’s shared secret.
<USERNAME> Specify username for authentication.
<PASSWORD> Specify the password.
wlan <WLAN-NAME>
ssid <SSID>
Optional. Tests the RADIUS server on the local WLAN. Specify the local WLAN name.
• ssid <SSID> – Specify the local RADIUS server’s SSID.
on <DEVICE-NAME> Optional. This is a recursive parameter also applicable to the WLAN parameter. Performs tests on a specified
device
• <DEVICE-NAME> – Specify the name of the AP, wireless controller, or service platform.