Reference Guide (Supporting software release 5.5.0.0 and later) Owner manual

Brocade Mobility RFS Controller CLI Reference Guide 333
53-1003098-01
4
Example
rfs7000-37FABE(config-wlan-test)#data-rates 2.4GHz gn
rfs7000-37FABE(config-wlan-test)#show context
wlan test
ssid test
bridging-mode local
encryption-type none
authentication-type eap
accounting syslog host 172.16.10.4 port 2
data-rates 2.4GHz gn
client-load-balancing probe-req-intvl 5ghz 5
client-load-balancing band-discovery-intvl 2
captive-portal-enforcement fall-back
acl exceed-rate wireless-client-denied-traffic 20 disassociate
broadcast-dhcp validate-offer
rfs7000-37FABE(config-wlan-test)#
description
wlan-mode commands
Defines the WLAN description
Supported in the following platforms:
1,11,2,5.5 The following data rates are specific to the 2.4 GHz channel:
• 1 – 1-Mbps
• 11 – 11-Mbps
• 2 – 2-Mbps
• 5.5 – 5.5-Mbps
[12,18,24,36,48,54,6,9,
basic-1,basic-11,
basic-12,basic-18,
basic-2,
basic-36,basic-48,
basic-5.5,
basic-54,basic-6,
basic-9,basic-mcs-1s,
mcs-1s,mcs2s,mcs-3s]
The following data rates are common to both the 2.4 GHz and 5.0 GHz channels:
• 12 – 12 Mbps
• 18 – 18-Mbps
• 24 – 24 Mbps
• 36 – 36-Mbps
• 48 – 48-Mbps
• 54 – 54-Mbps
• 6 – 6-Mbps
• 9 – 9-Mbps
• basic-1 – basic 1-Mbps
• basic-11 – basic 11-Mbps
• basic-12 – basic 12-Mbps
• basic-18 – basic 18-Mbps
• basic-2 – basic 2-Mbps
• basic-36 – basic 36-Mbps
• basic-48 – basic 48-Mbps
• basic-5.5 – basic 5.5-Mbps
• basic-54 – basic 54-Mbps
• basic-6 – basic 6-Mbps
• basic-9 – basic 9-Mbps
• basic-mcs-1s – Modulation and coding scheme data rates for 1 Spatial Stream
• mcs-1s – Applicable to 1-spatial stream data rates
• mcs-2s – Applicable to 2-spatial stream data rates
• mcs-3s – Applicable to 3-spatial stream data rates