Reference Guide (Supporting software release 5.5.0.0 and later) Owner manual

332 Brocade Mobility RFS Controller CLI Reference Guide

53-1003098-01

data-rates 5GHz custom

[12|18|24|36|48|54|6|9|basic-1|basic-11|basic-12|basic-18|

basic-mcs-1s|mcs-1s|mcs2s|mcs3s]

Parameters

data-rates 2.4GHz [b-only|bg|bgn|default|g-only|gn]

data-rates 5GHz [a-only|an|default]

data-rates [2.4GHz|5GHz] custom

[1|11|12|18|2|24|36|48|5.5|54|6|9|basic-1|basic-11|

-6|

basic-9|basic-mcs-1s|mcs-1s|mcs-2s|mcs-3s]

data-rates Specifies the 802.11 rates supported when mapped to a 2.4 GHz radio

b-only Uses rates that support only 11b clients

bg Uses rates that support both 11b and 11g clients

bgn Uses rates that support 11b, 11g and 11n clients

default Uses the default rates configured for a 2.4 GHz radio

g-only Uses rates that support operation in 11g only

gn Uses rates that support 11g and 11n clients

data-rates Specifies the 802.11 rates supported when mapped to a 5.0 GHz radio

a-only Uses rates that support operation in 11a only

an Uses rates that support 11a and 11n clients

default Uses default rates configured for a 5.0 GHz

data-rates [2.4GHz|5GHz] Specifies the 802.11 rates supported when mapped to a 2.4 GHz or 5.0 GHz radio

custom Configures a data rates list by specifying each rate individually. Use 'basic-' prefix before a rate to indicate it

is used as a basic rate (For example, 'data-rates custom basic-1 basic-2 5.5 11').

The data-rates for 2.4 GHz and 5.0 GHz channels are the same with a few exceptions.

The 2.4 GHz channel has a few extra data rates: 1, 11, 2, and 5.5.