Reference Guide (Supporting software release 5.5.0.0 and later) Owner manual

Brocade Mobility RFS Controller CLI Reference Guide 227
53-1003098-01
4
rfs7000-37FABE(config-device-categorization-rfs7000)#
Related Commands:
device-categorization-mode commands
device-categorization
The following table summarizes device categorization configuration commands.
mark-device
device-categorization-mode commands
Adds a device to the device categorization list as sanctioned or neighboring. Devices are further
classified as AP or client.
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
mark-device <1-1000> [sanctioned|neighboring] [br|client]
mark-device <1-1000> [sanctioned|neighboring] br {mac <MAC>|ssid <SSID> {mac
<MAC>}}
mark-device <1-1000> [sanctioned|neighboring] client {mac <MAC>}
Parameters
no Removes an existing device categorization list
Command Description Reference
mark-device Adds a device to the device categorization list page 227
no Removes a device from the device categorization list page 228
clrscr Clears the display screen page 385
commit Commits (saves) changes made in the current session page 386
end Ends and exits the current mode and moves to the PRIV EXEC mode page 234
exit Ends the current mode and moves to the previous mode page 387
help Displays the interactive help system page 387
revert Reverts changes to their last saved configuration page 394
service Invokes service commands to troubleshoot or debug
(config-if) instance
configurations
page 394
show Displays running system information page 429
write Writes information to memory or terminal page 425