Reference Guide (Supporting software release 5.5.0.0 and later) Owner manual

222 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
4
customize show-wireless-radio-stats-rf
(average-retry-number,error-rate,noise,
q-index,radio-alias
<3-67>,radio-id,radio-mac,rx-rate,signal,snr,t-index,tx-rate)
Example
rfs7000-37FABE(config)#customize show-wireless-client br-name auth
rfs7000-37FABE(config)#commit
rfs7000-37FABE(config)#show wireless client
-----------------------
AP-NAME AUTH
-----------------------
-----------------------
Total number of wireless clients displayed: 0
rfs7000-37FABE(config)#
radio-mac Includes the radio-mac column, which displays the radio’s base MAC address
rx-bytes Includes the rx-bytes column, which displays the total number of bytes received by the radio
rx-errors Includes the rx-error column, which displays the total number of errors received by the radio
rx-packets Includes the rx-packets column, which displays the total number of packets received by the radio
rx-throughput Includes the rx-throughput column, which displays the receive throughput at the radio
tx-bytes Includes the tx-bytes column, which displays the total number of bytes transmitted by the radio
tx-dropped Includes the tx-dropped column, which displays the total number of packets dropped by the radio
tx-packets Includes the tx-packets column, which displays the total number of packets transmitted by the radio
tx-throughput Includes the tx-throughput column, which displays the transmission throughput at the radio
show-wireless-radio-stats-rf Customizes the show wireless radio stats RF command output
average-retry-number Includes the average-retry-number column, which displays the average number of retransmissions per
packet
error-rate Includes the error-rate column, which displays the rate of error for the radio
noise Includes the noise column, which displays the noise detected by the radio
q-index Includes the q-index column, which displays the RF quality index
NOTE: Higher values indicate better RF quality.
radio-alias <3-67> Includes the radio-alias column, which displays the radio’s alias (combination of AP's hostname and radio
interface number in the “HOSTNAME:RX” format)
• <3-67> – Sets the radio-alias column width from 3 - 67 characters
radio-id Includes the radio-id column, which displays the radio‘s ID (combination of AP’s MAC address and radio
interface number in the “AA-BB-CC-DD-EE-FF:RX” format)
radio-mac Includes the radio-mac column, which displays the radio’s base MAC address
rx-rate Includes the rx-rate column, which displays the receive rate at the particular radio
signal Includes the signal column, which displays the signal strength at the particular radio
snr Includes the snr column, which displays the signal-to-noise ratio at the particular radio
t-index Includes the t-index column, which displays the traffic utilization index at the particular radio
tx-rate Includes the tx-rate column, which displays the packet transmission rate at the particular radio