Reference Guide (Supporting software release 5.5.0.0 and later) Owner manual

218 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
4
customize hostname-column-width <1-64>
customize show-wireless-client (br-name <1-64>,auth,client-identity <1-32>,
bss,enc,hostname <1-64>,ip,last-active,location <1-64>,mac,radio-alias
<3-67>,
radio-id,radio-type,role <1-32>,state,username <1-64>,vendor,vlan,wlan)
customize show-wireless-client-stats (hostname <1-64>,mac,rx-bytes,rx-errors,
rx-packets,rx-throughput,tx-bytes,tx-dropped,tx-packets,tx-throughput)
hostname-column-width
<1-64>
Configures default width of the hostname column in all show commands
• <1-64> – Sets the hostname column width from 1 - 64 characters
show-wireless-client Customizes the show wireless client command output
br-name <1-64> Includes the br-name column, which displays the name of the AP with which this client associates
• <1-64> – Sets the br-name column width from 1 - 64 characters
auth Includes the auth column, which displays the authorization protocol used by the wireless client
client-identity <1-32> Includes the client-identity (device type) column, which displays details gathered from DHCP device
fingerprinting feature (when enabled). For more information, see client-identity.
• <1-32> – Sets the client-identity column width from 1 - 32 characters
bss Includes the BSS column, which displays the BSS ID the wireless client is associated with
enc Includes the enc column, which displays the encryption suite used by the wireless client
hostname <1-64> Includes the hostname column, which displays the wireless client’s hostname
• <1-64> – Sets the hostname column width from 1 - 64 characters
ip Includes the IP column, which displays the wireless client’s current IP address
last-active Includes the last-active column, which displays the time of last activity seen from the wireless client
location <1-64> Includes the location column, which displays the location of the client’s associated access points
• <1-64> – Sets the location column width from 1 - 64 characters
mac Includes the MAC column, which displays the wireless client’s MAC address
radio-alias <3-67> Includes the radio-alias column, which displays the radio alias with the AP's hostname and radio interface
number in the “HOSTNAME:RX” format
• <3-64> – Sets the radio-alias column width from 3 - 67 characters
radio-id Includes the radio-id column, which displays the radio ID with the AP’s MAC address and radio interface
number in the “AA-BB-CC-DD-EE-FF:RX” format
radio-type Includes the radio-type column, which displays the wireless client’s radio type
role <1-32> Includes the role column, which displays the client’s role
• <1-32> – Sets the role column width from 1 - 32 characters
state Includes the state column, which displays the wireless client’s current availability state
username <1-64> Includes the username column, which displays the wireless client’s username
• <1-64> – Specify the username column width from 1 - 64 characters.
vendor Includes the vendor column, which displays the wireless client’s vendor ID
vlan Includes the VLAN column, which displays the wireless client’s assigned VLAN
wlan Includes the WLAN column, which displays the wireless client’s assigned WLAN
show-wireless-client-stats Customizes the show wireless client stats command output
hostname <1-64> Includes the hostname column, which displays the wireless client’s hostname
• <1-64> – Sets the hostname column width from 1 - 64 characters
mac Includes the MAC column, which displays the wireless client’s MAC address