Reference Guide (Supporting software release 5.5.0.0 and later) Owner manual

ManualsBrandsBrocade ManualsComputer AccessoriesMobility RFS Controller CLI

211

212

213

214

215

216

217

218

219

220

198 Brocade Mobility RFS Controller CLI Reference Guide

53-1003098-01

[description|footer|header|title] <CONTENT>

no-service Indicates the page is displayed when certain critical services are unavailable and the user fails to access the

captive portal. The no-service page asserts the captive portal service is temporarily unavailable due to

technical reasons. Once the services become available, the captive portal user is automatically connected

back to the services available through the captive portal. The possible scenarios are:

• The RADIUS server (on-board or external) is not reachable and the user cannot be authenticated

• The external captive portal server is not reachable

• The connectivity between the adopted AP and controller is lost

• The external DHCP server is not reachable

To provide this service, enable the following:

• External captive portal server monitoring

• AAA server monitoring. This enables detection of RADIUS server failure.

• External DHCP server monitoring

For more information on enabling these critical resource monitoring, see Chapter 4, service.

welcome Indicates the page is displayed after a user has been successfully authenticated

The welcome page asserts a user has logged in successfully and can access the captive portal.

<URL> Indicates the URL to the Web page displayed. Query String: URL can include query tags.

Supported Query Tags are:

'WING_TAG_CLIENT_IP' - Captive portal client IPv4 address

'WING_TAG_CLIENT_MAC' - Captive portal client MAC address

'WING_TAG_WLAN_SSID ' - Captive portal client WLAN ssid

'WING_TAG_AP_MAC' - Captive portal client AP MAC address

'WING_TAG_AP_NAME' - Captive portal client AP Name

'WING_TAG_RF_DOMAIN' - Captive portal client RF Domain

'WING_TAG_CP_SERVER' - Captive portal server address

'WING_TAG_USERNAME' - Captive portal authentication username

Example:

http://cportal.com/policy/login.html?client_ip=WING_TAG_CLIENT_IP&ap_m

c=WING_TAG_AP_MAC. Use '&' or '?' character to separate

field-value pair. Note: Enter 'ctrl-v' followed by '?' to configure query string

internal Indicates the Web pages are internal. This is the default setting.

acknowledgment Indicates the Web page is displayed for users to acknowledge the information provided

agreement Indicates the page is displayed for “Terms & Conditions”

fail Indicates the page is displayed for login failure