Reference Guide (Supporting software release 5.5.0.0 and later) Owner manual

Brocade Mobility RFS Controller CLI Reference Guide 157
53-1003098-01
4
Global Configuration Commands
Table 2 summarizes the Global Configuration commands.
TABLE 2 Global Config Commands
Command Description Reference
aaa-policy Configures a AAA policy page 158
aaa-tacacs-policy Configures AAA-TACACS policy page 160
advanced-wips-policy Configures an advanced WIPS policy page 161
alias Configures network, VLAN, and service aliases page 162
br650 Adds an Brocade Mobility 650 Access Point to the network page 169
br6511 Adds an Brocade Mobility 6511 Access Point to the network page 169
br1220 Adds an Brocade Mobility 1220 Access Point to the network page 170
br71xx Adds an Brocade Mobility 71XX Access Point to the network page 171
association-acl-policy Configures an association ACL policy page 174
auto-provisioning-polic
y
Configures an auto provisioning policy, which defines the process by which an access
point discovers controllers and associates with it.
page 175
captive portal Configures a captive portal page 176
clear Clears the event history page 202
client-identity Enables client identification through DHCP device fingerprinting page 203
client-identity-group Creates a new client identity group and enters its configuration mode page 209
clone Clones a specified configuration object page 215
customize Customizes the CLI command summary output page 216
device Specifies configuration on multiple devices page 224
device-categorization Configures a device categorization object page 225
dhcp-server-policy Configures a DHCP server policy page 229
dns-whitelist Configures a DNS whitelist page 231
event-system-policy Configures an event system policy page 234
firewall-policy Configures a firewall policy page 246
global-association-list Configures a global list of client MAC addresses page 247
host Sets the system's network name page 249
inline-password-encryp
tion
Stores the encryption key in the startup configuration file page 250
ip Configures Internet Protocol (IP) components page 251
l2tpv3 Configures Layer 2 Tunneling Protocol Version 3 (L2TPV3) tunnel policy page 252
mac Configures MAC access lists (goes to the MAC Access Control List (ACL) mode) page 253
management-policy Configures a management policy page 254
meshpoint Configures meshpoint related configuration commands page 255
meshpoint-qos-policy Configures a set of parameters that defines the
quality of service (QoS) page 257
mint-policy Configures a MiNT security policy page 258