Reference Guide (Supporting software release 5.5.0.0 and later) Owner manual

Brocade Mobility RFS Controller CLI Reference Guide 131
53-1003098-01
3
no mac-user-db user [<USER-NAME>|all]
no raid locate
Usage Guidelines:
The no command negates any command associated with it. Wherever required, use the same
parameters associated with the command getting negated.
Example
rfs7000-37FABE#no adoption
rfs7000-37FABE#
rfs7000-37FABE#no page
rfs7000-37FABE#
rfs7000-37FABE#no service cli-tables-expand line
rfs7000-37FABE#
Related Commands:
page
Privileged Exec Mode Commands
Toggles controller paging. Enabling this command displays the CLI command output page by page,
instead of running the entire output at once.
Supported in the following platforms:
no mac-user-db user Deletes a specified user or all users from the MAC registration user database
This command is available only on the NX9000 series service platforms.
<USER-NAME> Deletes the user, identified by the <USER-NAME> keyword, from the MAC registration user database
• <USER-NAME> – Specify the username.
all Deletes all users from the MAC registration user database
no raid locate Disables flashing of LEDs on RAID drives.
This command is available only on the NX9000 series service platforms
For more information on RAIDs and enabling LEDs on RAID drives, see raid.
auto-provisioning-policy Resets the adoption state of a device and all devices adopted to it
captive portal Manages captive portal clients
crypto Enables digital certificate configuration and RSA Keypair management
logging Modifies message logging settings
page Resets controller paging function to its default
service Performs different functions depending on the parameter passed
terminal Sets the length or the number of lines displayed within the terminal window
upgrade Upgrades software image on a device
wireless-client Manages wireless clients
virtual-machine Installs, configures, and monitors the status of third-party VMs
raid Enables Redundant Array of Independent Disks (RAID) management