Reference Guide (Supporting software release 5.5.0.0 and later) Owner manual

1276 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
27
no
[allowed-vlans|beacon-format|control-vlan|description|meshid|root|security-mo
de|
shutdown]
no data-rates [2.4GHz|5GHz]
no neighbor inactivity-timeout
no use meshpoint-qos-policy
no wpa2 [key-rotation|psk]
no wpa2 key-rotation [broadcast|unicast]
no wpa2 psk
no service allow-ht-only
Parameters
no
[allowed-vlans|beacon-format|control-vlan|description|meshid|root|security-mo
de|
shutdown]
no data-rates [2.4GHz|5GHz]
no neighbor inactivity-timeout
no use meshpoint-qos-policy
no wpa2 key-rotation [broadcast|unicast]
no wpa2 psk
no allowed-vlans Removes all VLANs from the allowed VLANs list
no beacon-format Resets the beacon format on this meshpoint to its default of meshpoint
no control-vlan Removes the configured control VLAN
no description Removes the defined description for this meshpoint
no meshid Removes the configured mesh id for this meshpoint
no root Removes the configuration of this meshpoint as a root meshpoint
no security-mode Removes the configuration of security mode to use on this meshpoint to its default of “none”
no shutdown Enables the use of this meshpoint
no data-rates Resets data rate configuration to its default
2.4GHz Resets data rate configuration for the 2.4 GHz radio
5GHz Resets data rate configuration for the 5.0 GHz radio
no neighbor Resets the neighbor related configuration
inactivity-timeout Resets the inactivity timeout to its default
no use meshpoint-qos-policy Resets the mesh-qos-policy to default mesh-qos-policy
no wpa2 key-rotation Resets the WPA2 encryption key rotation configuration for this meshpoint
broadcast Resets the WPA2 key rotation configured for broadcast packets to its default
unicast Resets the WPA2 key rotation configured for unicast packets to its default
no wpq2 psk Removes the pre shared key configured for the meshpoint