Reference Guide (Supporting software release 5.5.0.0 and later) Owner manual

1174 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
22
wlan-qos-policy
WLAN-QOS-POLICY
WLAN QoS configurations differ significantly from QoS policies configured for radios. WLAN QoS
configurations are designed to support the data requirements of wireless clients, including the
data types they support and their network permissions. Radio QoS policies are specific to the
transmit and receive characteristics of the connected radio’s themselves, independent from the
wireless clients these access point radios support.
Table 20 summarizes WLAN QoS policy configuration commands.
accelerated-multicast
wlan-qos-policy
Configures the accelerated multicast stream address and forwarding QoS classification settings
Enabling this option allows the system to automatically detect and convert multicast streams to
unicast streams. When a stream is converted and queued up for transmission, there are a number
of classification mechanisms that can be applied to the stream. Use the classification options to
specify the traffic type to prioritize.
Supported in the following platforms:
TABLE 20 WLAN-QoS-Policy-Config Commands
Command Description Reference
accelerated-multicast Configures accelerated multicast stream addresses and forwards QoS classifications page 1174
classification Classifies WLAN traffic based on priority page 1175
multicast-mask Configures the egress prioritization multicast mask page 1177
no Negates a command or sets its default page 1178
qos Defines the QoS configuration page 1180
rate-limit Configures the WLAN traffic rate limit using a WLAN QoS policy page 1181
svp-prioritization Enables Spectralink voice protocol support on a WLAN page 1184
voice-prioritization Prioritizes voice client over other clients page 1185
wmm Configures 802.11e/wireless multimedia parameters page 1185
clrscr Clears the display screen page 385
commit Commits (saves) changes made in the current session page 386
end Ends and exits the current mode and moves to the PRIV EXEC mode page 234
exit Ends the current mode and moves to the previous mode page 387
help Displays the interactive help system page 387
revert Reverts changes to their last saved configuration page 394
service Invokes service commands to troubleshoot or debug
(config-if) instance
configurations
page 394
show Displays running system information page 429
write Writes information to memory or terminal page 425