Reference Guide (Supporting software release 5.5.0.0 and later) Owner manual

Brocade Mobility RFS Controller CLI Reference Guide 1157
53-1003098-01
21
no interference-event [non-conforming-data|wireless-bridge]
no signature <WIPS-SIGNATURE>
no use device-categorization
Usage Guidelines:
The
no command negates any command associated with it. Wherever required, use the same
parameters associated with the command getting negated.
Example
The following example shows the WIPS Policy ‘test’ settings before the ‘no’
commands are executed:
rrfs7000-37FABE(config-wips-policy-test)#show context
wips-policy test
history-throttle-duration 77
event excessive 80211-replay-check-failure threshold-client 10
threshold-radio 99 filter-ageout 9
event client-anomaly wellenreiter filter-ageout 99
interference-event non-conforming-data
br-detection-ageout 50
br-detection-wait-time 15
rfs7000-37FABE(config-wips-policy-test)#
rfs7000-37FABE(config-wips-policy-test)#no event client-anomaly wellenreiter
filter-ageout 99
rfs7000-37FABE(config-wips-policy-test)#no interference-event
non-conforming-data
rfs7000-37FABE(config-wips-policy-test)#no history-throttle-duration
The following example shows the WIPS Policy ‘test’ settings after the ‘no’
commands are executed:
rfs7000-37FABE(config-wips-policy-test)#show context
wips-policy test
event excessive 80211-replay-check-failure threshold-client 10
threshold-radio 99 filter-ageout 9
no event client-anomaly wellenreiter filter-ageout 99
br-detection-ageout 50
br-detection-wait-time 15
threshold-client
<0-65535>
Optional. Resets a client threshold limit after which the filter is triggered and an event is recorded
• <0-65535> – Resets a wireless client threshold limit from 0 - 65535 seconds
threshold-radio
<0-65535>
Optional. Resets a radio threshold limit after which an event is recorded
• <0-65535> – Resets a radio threshold limit from 0 - 65535 seconds
no interference-event Disables interference event settings
non-conforming-data Does not consider non conforming data packets when calculating Smart RF interference
wireless-bridge Does not consider Wireless Bridge frames when calculating Smart RF interference
no signature Deletes a WIPS policy signature
<WIPS-SIGNATURE> Defines the unique name given to a WIPS policy signature
no use Disables the use of a device categorization policy with this WIPS policy
device-categorization Resets the device categorization name to its default