Reference Guide (Supporting software release 5.5.0.0 and later) Owner manual

1098 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
19
br-location
user-role commands
Configures an AP’s deployment location based filter for this user-defined role
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
br-location [any|contains|exact|not-contains]
br-location any
br-location [contains|exact|not-contains] <WORD>
Parameters
br-location any
br-location [contains|exact|not-contains] <WORD>
Example
rfs7000-37FABE(config-role-policy-test-user-role-testing)#br-location
contains office
rfs7000-37FABE(config-role-policy-test-user-role-testing)#show context
user-role testing precedence 10
br-location contains office
rfs7000-37FABE(config-role-policy-test-user-role-testing)#
service Invokes service commands to troubleshoot or debug
(config-if) instance
configurations
page 394
show Displays running system information page 429
write Writes information to memory or terminal page 425
Commands Description Reference
br-location any Specifies the AP location to match (in a RF Domain) or the AP’s resident configuration
• any – Defines an AP’s location as any
br-location Specifies the AP location to match (in a RF Domain) or the AP’s resident configuration. Select one of the
following filter options: contains, exact, or not-contains.
contains <WORD> Applies role if the associating AP’s location contains the location string specified in the role.
• <WORD> – Specify the location string to match.
exact <WORD> Applies role if the associating AP’s location exactly matches the string specified in the role.
• <WORD> – Specify the exact location string to match.
not-contains <WORD> Applies role if the associating AP’s location does not contain the location string specified in the role.
• <WORD> – Specify the location string not to match.