Reference Guide (Supporting software release 5.5.0.0 and later) Owner manual

1080 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
18
rfs7000-37FABE(config-radio-qos-test)#show context
radio-qos-policy test
admission-control voice max-airtime-percent 9
admission-control voice reserved-for-roam-percent 8
admission-control best-effort max-clients 200
accelerated-multicast stream-threshold 15
accelerated-multicast client-timeout 500
rfs7000-37FABE(config-radio-qos-test)#
rfs7000-37FABE(config-radio-qos-test)#no admission-control best-effort
max-clients
rfs7000-37FABE(config-radio-qos-test)#no accelerated-multicast client-timeout
The following example shows the Radio-qos-policy ‘test’ settings after the
‘no’ commands are executed:
rfs7000-37FABE(config-radio-qos-test)#show context
radio-qos-policy test
admission-control voice max-airtime-percent 9
admission-control voice reserved-for-roam-percent 8
accelerated-multicast stream-threshold 15
rfs7000-37FABE(config-radio-qos-test)#
rfs4000-229D58(config-radio-qos-test)#show context
radio-qos-policy test
service admission-control across-reassoc
rfs4000-229D58(config-radio-qos-test)#
rfs4000-229D58(config-radio-qos-test)#no service admission-control
across-reassoc
rfs4000-229D58(config-radio-qos-test)#show context
radio-qos-policy test
rfs4000-229D58(config-radio-qos-test)#
Related Commands:
smart-aggregation
radio-qos-policy
Configures smart aggregation parameters on this Radio QoS policy
Smart aggregation enhances frame aggregation by dynamically selecting the time when the
aggregated frame is transmitted. In a frame’s typical aggregation, an aggregated frame is sent
when:
• A pre-configured number of aggregated frames is reached
accelerated-multicast Configures multicast streams for acceleration. Multicasting allows the group transmission of data
streams
admission-control Enables admission control across all radios for one or more access categories
smart-aggregation Configures smart aggregation parameters on this Radio QoS policy
service Invokes service commands in the radio QoS configuration mode
wmm Configures 802.11e wireless multimedia parameters