Reference Guide (Supporting software release 5.5.0.0 and later) Owner manual

Brocade Mobility RFS Controller CLI Reference Guide 1041
53-1003098-01
17
guest
radius-group
Configures this group as a guest (non-management) group. A guest user group has temporary
permissions to the controller’s local RADIUS server. You can configure multiple guest user groups,
each having a unique set of settings. Guest user groups cannot be made management groups with
access and role permissions.
Guest users and policies are used for captive portal authorization to the network.
Supported in the following platforms:
• Access Points — Brocade Mobility 650 Access Point, Brocade Mobility 6511 Access Point,
Brocade Mobility 1220 Access Point, Brocade Mobility 71XX Access Point, Brocade
Mobility 1240 Access Point
• Wireless Controllers — Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade
Mobility RFS7000
• Service Platforms — Brocade Mobility RFS9510
Syntax:
guest
Parameters
None
Example
rfs7000-37FABE(config-radius-group-test)#guest
rfs7000-37FABE(config-radius-group-test)#show context
radius-group test
guest
rfs7000-37FABE(config-radius-group-test)#
Related Commands:
policy
radius-group
Sets a RADIUS group’s authorization settings, such as access day/time, WLANs etc.
service Invokes service commands to troubleshoot or debug (config-if) instance
configurations
page 394
show Displays running system information page 429
write Writes information to memory or terminal page 425
TABLE 15 RADIUS-Group-Config Commands
Command Description Reference
no Makes this group a non-guest group