Reference Guide (Supporting software release 5.5.0.0 and later) Owner manual

1014 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
15
no level 2 area-id
no mtu
no router packet priority
no udp port <LINE-SINK>
Example
The following example shows the global Mint Policy parameters before the ‘no’
commands are executed:
rfs7000-37FABE(config-mint-policy-global-default)#show context
mint-policy global-default
udp port 1024
mtu 996
level 2 area-id 2000
sign-unknown-device
security-level control-and-data
rejoin-timeout 1000
rfs7000-37FABE(config-mint-policy-global-default)#
rfs7000-37FABE(config-mint-policy-global-default)#no level 2 area-id
rfs7000-37FABE(config-mint-policy-global-default)#no mtu
rfs7000-37FABE(config-mint-policy-global-default)#no udp port
The following example shows the global Mint Policy parameters after the ‘no’
commands are executed:
rfs7000-37FABE(config-mint-policy-global-default)#show context
mint-policy global-default
sign-unknown-device
security-level control-and-data
rejoin-timeout 1000
rfs7000-37FABE(config-mint-policy-global-default)#
Related Commands:
no level 2 Disables level 2 MiNT routing
area identifier Negates the area identifier
no mtu Reverts the configured MiNT MTU value to its default
no router packet priority Resets the MiNT router packet priority to default
no udp Resets the UDP/IP encapsulation parameters to its default
port <LINE-SINK> Uses the default UDP port for MiNT encapsulation
level Configures the global MiNT routing level
mtu Configures the global MiNT MTU
router Configures the priority for MiNT router packets (HELLO, LSP, PSNP, and EXTVLAN)
udp Configures the MiNT UDP/IP encapsulation parameters