Owner's manual

Feature ICX 6430 ICX 6450 FCX ICX 6610 ICX 6650 FSX 800
FSX 1600
ICX 7750
Hitless OS upgrade No No No No No 08.0.01 No
Boot code synchronization for active and
redundant management modules
N/A N/A N/A N/A No 08.0.01 No
Software reboot 08.0.01 08.0.01 08.0.01 08.0.01 08.0.01 08.0.01 08.0.10
Show boot preference 08.0.01 08.0.01 08.0.01 08.0.01 08.0.01 08.0.01 08.0.10
Loading and saving configuration files 08.0.01 08.0.01 08.0.01 08.0.01 08.0.01 08.0.01 08.0.10
System reload scheduling 08.0.01 08.0.01 08.0.01 08.0.01 08.0.01 08.0.01 08.0.10
Diagnostic error codes and remedies for
TFTP transfers
08.0.01 08.0.01 08.0.01 08.0.01 08.0.01 08.0.01 08.0.10
IPv4 ping 08.0.01 08.0.01 08.0.01 08.0.01 08.0.01 08.0.01 08.0.10
IPv4 traceroute 08.0.01 08.0.01 08.0.01 08.0.01 08.0.01 08.0.01 08.0.10
Layer 3 hitless route purge No 08.0.01 08.0.01 08.0.01 No 08.0.01
4
No
OAM Overview
For easy software image management, all Brocade devices support the download and upload of
software images between the flash modules on the devices and a Trivial File Transfer Protocol (TFTP)
server on the network.
Brocade devices have two flash memory modules:
• Primary flash - The default local storage device for image files and configuration files.
• Secondary flash - A second flash storage device. You can use the secondary flash to store
redundant images for additional booting reliability or to preserve one software image while testing
another one.
Only one flash device is active at a time. By default, the primary image will become active upon reload.
You can update the software contained on a flash module using TFTP to copy the update image from
a TFTP server onto the flash module. In addition, you can copy software images and configuration
files from a flash module to a TFTP server.
NOTE
Brocade devices are TFTP clients but not TFTP servers. You must perform the TFTP transaction from
the Brocade device. You cannot "put" a file onto the Brocade device using the interface of your TFTP
server.
NOTE
If you are attempting to transfer a file using TFTP but have received an error message, refer to
Diagnostic error codes and remedies for TFTP transfers on page 108.
4
3rd generation modules.
OAM Overview
88 FastIron Ethernet Switch Administration Guide
53-1003075-02