Owner's manual

NTP associations detail command output descriptions (Continued)TABLE 6
Field Description
root delay The delay along path to root (the final stratum 1 time source).
root disp Dispersion of path to root.
reach peer The peer reachability (bit string in octal).
Delay Round-trip delay to peer.
offset Offset of a peer clock relative to this clock.
Dispersion Dispersion of a peer clock.
precision Precision of a peer clock.
version Peer NTP version number.
org time Originate time stamp of the last packet.
rcv time Receive time stamp of the last packet.
xmt time Transmit time stamp of the last packet.
filter delay Round-trip delay in milliseconds of last 8 samples.
filter offset Clock offset in milliseconds of last 8 samples.
filter error Approximate error of last 8 samples.
Configuration Examples
The following sections list configuration examples to configure the Brocade device.
NTP server and client mode configuration
Sample CLI commands to configure the Brocade device in NTP server and client modes.
Brocade(config-ntp)# server 10.1.2.3 minpoll 5 maxpoll 10
Brocade(config-ntp)# server 11::1/64
Brocade(config-ntp)# peer 10.100.12.18
Brocade(config-ntp)# peer 10.100.12.20
Brocade(config-ntp)# peer 10.100.12.67
Brocade(config-ntp)# peer 10.100.12.83
NTP client mode configuration
Sample CLI commands to configure the Brocade device in NTP client mode.
Brocade(config-ntp)# server 10.1.2.3 minpoll 5 maxpoll 10
Brocade(config-ntp)# server 11::1/24
Configuration Examples
FastIron Ethernet Switch Administration Guide 53
53-1003075-02