Owner's manual

The lsa-id is the LSA ID.
The lsa-router-id is the LSA router ID.
Message
Level
Notification
Message
OSPF virtual intf authen failure, rid router-id ,
intf addr ip-addr , pkt src addr src-ip-addr ,
error type error-type , pkt type pkt-type
Explanation Indicates that an OSPF virtual routing interface authentication failure has
occurred.
The router-id is the router ID of the Brocade device.
The ip-addr is the IP address of the interface on the Brocade device.
The src-ip-addr is the IP address of the interface from which the Brocade
device received the authentication failure.
The error-type can be one of the following:
• bad version
• area mismatch
• unknown NBMA neighbor
• unknown virtual neighbor
• authentication type mismatch
• authentication failure
• network mask mismatch
• hello interval mismatch
• dead interval mismatch
• option mismatch
• unknown
The packet-type can be one of the following:
• hello
• database description
• link state request
• link state update
• link state ack
• unknown
Message
Level
Notification
Message
OSPF virtual intf config error, rid router-id ,
intf addr ip-addr , pkt src addr src-ip-addr ,
error type error-type , pkt type pkt-type
Explanation Indicates that an OSPF virtual routing interface configuration error has
occurred.
The router-id is the router ID of the Brocade device.
The ip-addr is the IP address of the interface on the Brocade device.
Syslog messages
FastIron Ethernet Switch Administration Guide 353
53-1003075-02