Owner's manual

• bad version
• area mismatch
• unknown NBMA neighbor
• unknown virtual neighbor
• authentication type mismatch
• authentication failure
• network mask mismatch
• hello interval mismatch
• dead interval mismatch
• option mismatch
• unknown
The packet-type can be one of the following:
• hello
• database description
• link state request
• link state update
• link state ack
• unknown
Message
Level
Notification
Message
OSPF intf rcvd bad pkt, rid router-id , intf addr
ip-addr , pkt src addr src-ip-add r, pkt type
pkt-type
Explanation Indicates that an OSPF interface received a bad packet.
The router-id is the router ID of the Brocade device.
The ip-addr is the IP address of the interface on the Brocade device.
The src-ip-addr is the IP address of the interface from which the Brocade
device received the authentication failure.
The packet-type can be one of the following:
• hello
• database description
• link state request
• link state update
• link state ack
• unknown
Message
Level
Notification
Message
OSPF intf rcvd bad pkt: Bad Checksum, rid ip-
addr , intf addr ip-addr , pkt size num , checksum
num , pkt src addr ip-addr , pkt type type
Explanation The device received an OSPF packet that had an invalid checksum.
Syslog messages
FastIron Ethernet Switch Administration Guide 349
53-1003075-02