Owner's manual

Explanation A user made SNMP configuration changes through the SNMP, console,
SSH, or Telnet session.
[ value-str ] does not appear in the message if SNMP community or
engineld is specified.
Message Level Informational
Message
SNMP Auth. failure, intruder IP: ip-addr
Explanation A user has tried to open a management session with the device using an
invalid SNMP community string.
The ip-addr is the IP address of the host that sent the invalid community
string.
Message Level Informational
Message
SSH | telnet server enabled | disabled from
console | telnet | ssh| snmp session [by user
username ]
Explanation A user enabled or disabled an SSH or Telnet session, or changed the SSH
enable/disable configuration through the SNMP, console, SSH, or Telnet
session.
Message Level Informational
Message
startup-config was changed or startup-config was
changed by user-name
Explanation A configuration change was saved to the startup-config file.
The user-name is the user ID, if they entered a user ID to log in.
Message Level Informational
Message
STP: Root Guard Port port-number, VLAN vlan-ID
consistent (Timeout).
Explanation Root guard unblocks a port.
Message Level Informational
Message
STP: Root Guard Port port-number , VLAN vlan-ID
inconsistent (Received superior BPDU).
Explanation Root guard blocked a port.
Syslog messages
FastIron Ethernet Switch Administration Guide 335
53-1003075-02