Owner's manual

7. Enables interface configuration for Ethernet 1/1/4 port.
Device(config-if-e1000-1/1/3)# interface ethernet 1/1/4
Interface configuration mode is entered for Ethernet 1/1/4.
8. Configure inline power on Ethernet 1/1/4 port, specifying the actual power value.
Device(config-if-e1000-1/1/4)# inline power decouple-datalink power-limit 12000
Configures inline power on Ethernet 1/1/4 port, specifying an actual power value of12000 mW and
decouples the datalink operations and the PoE operations for this port.
Power over Ethernet
FastIron Ethernet Switch Administration Guide 293
53-1003075-02