Administrator's Guide Supporting RSA Data Protection Manager (DPM) Environments (Supporting Fabric OS v7.2.0) Owner's manual

Table Of Contents
62 Fabric OS Encryption Administrator’s Guide (DPM)
53-1002922-01
Configuring encryption storage targets
2
FIGURE 45 Configuration Status screen
The screen contains the following information:
Device: The device type (target or host).
Device Port WWN: The port world wide name.
Represented by VI/VT: The virtual target (VT) mapped to the physical target or virtual
initiator (VI) representing the host.
VI/VT Port WWN: The port world wide name of the virtual target or virtual initiator.
VI/VT Node WWN: The node world wide name of the virtual target or virtual initiator.
13. Review any post-configuration instructions or messages, which you can copy to a clipboard or
print for later, then click Next.
The Next Steps screen displays. (Refer to Figure 46.) Post-configuration instructions for
installing public key certificates for the encryption switch are displayed. These instructions are
specific to the key vault type.