Administrator's Guide Supporting NetApp Lifetime Key Manager (LKM) and KeySecure Storage Secure Key Manager (SSKM) Environments (Supporting Fabric OS v7.2.0) User Manual

Fabric OS Encryption Administrator’s Guide (LKM/SSKM) 173
53-1002925-01
Data rekeying
3
1. Log in as Admin or FabricAdmin.
2. Enter the cryptocfg
--resume_rekey command, followed by the CryptoTarget container
name, the LUN number and the initiator PWWN.
FabricAdmin:switch> cryptocfg --resume_rekey my_disk_tgt 0x0 \
10:00:00:05:1e:53:37:99
Operation Succeeded
3. Check the status of the resumed rekey session.
FabricAdmin:switch> cryptocfg --show -rekey -all
• Read all data off the LUN and write it to another LUN. In this case, you can cancel the rekey
session by removing the LUN from its container and force-committing the transaction. See
“Removing a LUN from a CryptoTarget container” on page 151 for instructions on how to
remove a LUN by force.