Administrator's Guide Supporting Key Management Interoperability Protocol (KMIP) Key-Compliant Environments (Supporting Fabric OS v7.1.0) User guide

40 Fabric OS Encryption Administrator’s Guide (KMIP)
53-1002747-02
Steps for connecting to a KMIP appliance (SafeNet KeySecure)
2
Configuring a Brocade group on the KeySecure appliance
A Brocade group is configured on KeySecure appliance for all keys created by encryption switches
and blades. This needs to be done only once for each key vault.
1. Log in to the KeySecure web management console using the admin password.
2. Select the Security tab.
3. Select Local Users & Groups under Users & Groups.
4. Select Add under Local Users.
5. Create a Brocade user name and password.
6. Select the User Administration Permission and Change Password Permission check boxes,
then click Save.
7. Se le ct Add under Local Groups.
8. Add a Brocade group under Group, then click Save.
9. Select the new Brocade group name, then select Properties.
The Local Group Properties and a User List are displayed (Figure 29).
FIGURE 29 User & Group Configuration - Local Group Properties and User List
10. Under User List, select or type the Brocade user name under Username, then click Save.
The Brocade user name and password are now configured on the KeySecure appliance.
NOTE
The user name and password must also be registered on BNA. Proceed to “Registering the
KeySecure Brocade group user name and password”.