Administrator's Guide Supporting Key Management Interoperability Protocol (KMIP) Key-Compliant Environments (Supporting Fabric OS v7.1.0) User guide

Fabric OS Encryption Administrator’s Guide (KMIP) 145
53-1002747-02
Cryptocfg Help command output
3
Cryptocfg Help command output
All encryption operations are done using the cryptocfg command. The cryptocfg command has a
help output that lists all options.
switch:admin> cryptocfg --help
Usage: cryptocfg
--help -nodecfg:
Display the synopsis of node parameter configuration.
--help -groupcfg:
Display the synopsis of group parameter configuration.
--help -hacluster:
Display the synopsis of hacluster parameter configuration.
--help -devicecfg:
Display the synopsis of device container parameter configuration.
--help -transcfg:
Display the synopsis of transaction management.
rebalance
NOMN N N OMN NDisallowed
reclaim
NOMN N N OMN NDisallowed
recovermasterkey
NOMNNNN N OMDisallowed
regKACcert
NOMNNNN N OMDisallowed
regKAClogin
NOMNNNN N OMDisallowed
regkeyvault
NOMNNNN N OMDisallowed
regmembernode
NOMNNNN N OMDisallowed
removehaclustermember
NOMN N N OMN NDisallowed
removeinitiator
NOMN N N OMN NDisallowed
removeLUN
NOMN N N OMN NDisallowed
replace
NOMN N N OMN NDisallowed
resume_rekey
NOMN N N OMN NDisallowed
set
NOMNNNN N OMDisallowed
show
NOMNNNO N OMDisallowed
transabort
NOMN N N OMN NDisallowed
transshow
NOMNNNOMN ODisallowed
zeroizeEE
NOMNNNN N OMDisallowed
1. Legend: O = observe, OM = observe-modify, N = none/not available
TABLE 4 Encryption command RBAC availability and admin domain type
1
(Continued)
Command name User Admin Operator Switch
Admin
Zone
Admin
Fabric
Admin
Basic
Switch
Admin
Security
Admin
Admin Domain