Administrator's Guide Supporting HP Secure Key Manager (SKM) and HP Enterprise Secure Key Manager (ESKM) Environments (Supporting Fabric OS v7.2.0) Instruction Manual

Fabric OS Encryption Administrator’s Guide (SKM/ESKM) 55
53-1002923-01
Adding a switch to an encryption group
2
All configuration items have green check marks if the configuration is successful. A red stop
sign indicates a failed step. A message displays below the table, indicating the encryption
switch was added to the group you named, and the public key certificate is stored in the
location you specified.
7. Review important messages, then click Next.
The Error Instructions dialog box displays. (Refer to Figure 31.) Instructions for installing public
key certificates for the encryption switch are displayed.
FIGURE 31 Error Instructions dialog box
8. Review the post-configuration instructions, which you can copy to a clipboard or print for later.
9. Click Finish to exit the Configure Switch Encryption wizard.