Administrator's Guide Supporting HP Secure Key Manager (SKM) and HP Enterprise Secure Key Manager (ESKM) Environments (Supporting Fabric OS v7.2.0) Instruction Manual

218 Fabric OS Encryption Administrator’s Guide (SKM/ESKM)
53-1002923-01
VMware ESX server deployments
4
Figure 102 shows a VMware ESX server with two guest operating systems where two guests access
a fabric over a shared port. To enable this, both guests are assigned a virtual port.
There are two paths to a target storage device:
• Virtual host port 1, through the shared host port, to target port 1, redirected through CTC T1.
• Virtual host port 2, through the shared host port, to target port 2, redirected through CTC T2.
In this case, the virtual host port 1 is zoned with target port 1, and the virtual host port 2 is zoned
with target port 2 to enable the redirection zoning needed to redirect traffic to the correct CTC.