Administrator's Guide Supporting HP Secure Key Manager (SKM) and HP Enterprise Secure Key Manager (ESKM) Environments (Supporting Fabric OS v7.2.0) Instruction Manual

Fabric OS Encryption Administrator’s Guide (SKM/ESKM) 105
53-1002923-01
Rekeying all disk LUNs manually
2
FIGURE 73 Encryption Target Disk LUNs dialog box
4. Click Add.
The Add Disk LUNs dialog box displays. This dialog box includes a table of all LUNs in the
storage device that are visible to the hosts.
5. Click Re-keying Details.
The LUN Re-keying Details dialog box displays. The dialog box contains the following
information:
Key ID: The LUN key identifier.
Key ID State: The state of the LUN rekeying operation.
Encryption Algorithm: The algorithm of the LUN rekeying operation.
Re-key Session Number: The session number of the LUN rekeying operation.
Re-key Role: The role of the LUN rekeying operation.
Re-key State: The state of a manual LUN rekeying operation. Options are:
- Read Phase
- Write Phase
- Pending
- Disabled
Block Size: The block size used on the LUN.
Number of Blocks: The number of blocks written.
Current LBA: The Logical Block Address (LBA) of the block that is currently being written.
Re-key Completion: The status of the LUN rekeying operation’s progress.