Reference (Supporting Fabric OS v7.3.0) Owner manual
Table Of Contents
- Contents
- About This Document
- Using Fabric OS Commands
- Fabric OS Commands
- aaaConfig
- ad
- ag
- agAutoMapBalance
- agShow
- aliAdd
- aliCreate
- aliDelete
- aliRemove
- aliShow
- appLoginHistory
- aptPolicy
- auditCfg
- auditDump
- authUtil
- bannerSet
- bannerShow
- bcastShow
- bladeCfgGeMode
- bladeDisable
- bladeEnable
- bladeSwap
- bootLunCfg
- bottleneckMon
- bpPortLoopbackTest
- bpTurboRamTest
- bufOpMode
- ceePortLedTest
- ceePortLoopbackTest
- ceeTurboRamTest
- cfgActvShow
- cfgAdd
- cfgClear
- cfgCreate
- cfgDelete
- cfgDisable
- cfgEnable
- cfgRemove
- cfgSave
- cfgShow
- cfgSize
- cfgTransAbort
- cfgTransShow
- chassisBeacon
- chassisCfgPerrThreshold
- chassisDisable
- chassisDistribute
- chassisEnable
- chassisName
- chassisShow
- classConfig
- cliHistory
- cmsh
- configDefault
- configDownload
- configList
- configRemove
- configShow
- configUpload
- configure
- configureChassis
- creditRecovMode
- cryptoCfg
- dataTypeShow
- date
- dbgShow
- defZone
- diagClearError
- diagDisablePost
- diagEnablePost
- diagHelp
- diagPost
- diagRetry
- diagShow
- distribute
- dlsReset
- dlsSet
- dlsShow
- dnsConfig
- enclosureShow
- errClear
- errDelimiterSet
- errDump
- errFilterSet
- errModuleShow
- errShow
- ethIf
- exit
- extnCfg
- fabRetryShow
- fabRetryStats
- fabricLog
- fabricName
- fabricPrincipal
- fabricShow
- fabStatsShow
- fanDisable
- fanEnable
- fanShow
- faPwwn
- fastBoot
- fcipHelp
- fcipLedTest
- fcipPathTest
- fcoe
- fcoeLoginCfg
- fcoeLoginGroup
- fcPing
- fcpLogClear
- fcpLogDisable
- fcpLogEnable
- fcpLogShow
- fcpProbeShow
- fcpRlsProbe
- fcpRlsShow
- fcrBcastConfig
- fcrConfigure
- fcrEdgeShow
- fcrFabricShow
- fcrIclPathBWMonitor
- fcrLsan
- fcrLsanCount
- fcrLsanMatrix
- fcrPhyDevShow
- fcrProxyConfig
- fcrProxyDevShow
- fcrResourceShow
- fcrRouterPortCost
- fcrRouteShow
- fcrXlateConfig
- fddCfg
- fdmiCacheShow
- fdmiShow
- femDump
- ficonCfg
- ficonClear
- ficonCupSet
- ficonCupShow
- ficonHelp
- ficonShow
- fipsCfg
- firmwareCommit
- firmwareDownload
- firmwareDownloadStatus
- firmwareKeyShow
- firmwareRestore
- firmwareShow
- firmwareSync
- flow
- fmMonitor
- fosConfig
- fosExec
- frameLog
- fspfShow
- fwAlarmsFilterSet
- fwAlarmsFilterShow
- fwClassInit
- fwConfigReload
- fwFruCfg
- fwHelp
- fwMailCfg
- fwPortDetailShow
- fwSamShow
- fwSet
- fwSetToCustom
- fwSetToDefault
- gePortErrShow
- h
- haDisable
- haDump
- haEnable
- haFailover
- haRedundancy
- haShow
- haSyncStart
- haSyncStop
- help
- historyLastShow
- historyMode
- historyShow
- i
- iclCfg
- ifModeSet
- ifModeShow
- iflShow
- interfaceShow
- iodReset
- iodSet
- iodShow
- ipAddrSet
- ipAddrShow
- ipFilter
- ipSecConfig
- islShow
- itemList
- killTelnet
- ldapCfg
- lfCfg
- licenseAdd
- licenseIdShow
- licensePort
- licenseRemove
- licenseShow
- licenseSlotCfg
- linkCost
- logicalGroup
- login
- logout
- lsanZoneShow
- lsCfg
- lsDbShow
- mapsConfig
- mapsDb
- mapsHelp
- mapsPolicy
- mapsRule
- mapsSam
- memShow
- motd
- msCapabilityShow
- msConfigure
- msPlatShow
- msPlatShowDBCB
- msPlClearDB
- msPlMgmtActivate
- msPlMgmtDeactivate
- msTdDisable
- msTdEnable
- msTdReadConfig
- myId
- nbrStateShow
- nbrStatsClear
- nodeFind
- nsAliasShow
- nsAllShow
- nsCamShow
- nsDevLog
- nsShow
- nsZoneMember
- nsZoneShow
- passwd
- passwdCfg
- pathInfo
- pdShow
- perfAddEEMonitor
- perfCfgClear
- perfCfgRestore
- perfCfgSave
- perfClearAlpaCrc
- perfDelEEMonitor
- perfHelp
- perfMonitorClear
- perfMonitorShow
- perfResourceShow
- perfSetPortEEMask
- perfShowAlpaCrc
- perfShowPortEEMask
- perfTTmon
- portAddress
- portAlpaShow
- portBeacon
- portBufferCalc
- portBufferShow
- portCamShow
- portCfg
- portCfgAlpa
- portCfgAutoDisable
- portCfgCompress
- portCfgCreditRecovery
- portCfgDefault
- portCfgDPort
- portCfgEncrypt
- portCfgEport
- portCfgEportCredits
- portCfgEXPort
- portCfgFaultDelay
- portCfgFec
- portCfgFillword
- portCfgFlogiLogout
- portCfgFportBuffers
- portCfgGE
- portCfgGeMediaType
- portCfgGport
- portCfgISLMode
- portCfgLongDistance
- portCfgLossTov
- portCfgLport
- portCfgNonDfe
- portCfgNPIVPort
- portCfgNPort
- portCfgOctetSpeedCombo
- portCfgPersistence
- portCfgPersistentDisable
- portCfgPersistentEnable
- portCfgQoS
- portCfgShow
- portCfgSpeed
- portCfgTrunkPort
- portCfgVEXPort
- portCmd
- portDebug
- portDecom
- portDisable
- portDPortTest
- portEnable
- portEncCompShow
- portErrShow
- portFencing
- portFlagsShow
- portLedTest
- portLogClear
- portLogConfigShow
- portLogDisable
- portLogDump
- portLogDumpPort
- portLogEnable
- portLogEventShow
- portLoginShow
- portLogPdisc
- portLogReset
- portLogResize
- portLogShow
- portLogShowPort
- portLogTypeDisable
- portLogTypeEnable
- portLoopbackTest
- portMirror
- portName
- portPeerBeacon
- portPerfShow
- portRouteShow
- portShow
- portStats64Show
- portStatsClear
- portStatsShow
- portSwap
- portSwapDisable
- portSwapEnable
- portSwapShow
- portTest
- portTestShow
- portThConfig
- portTrunkArea
- portZoneShow
- powerOffListSet
- powerOffListShow
- psShow
- rasAdmin
- rasMan
- reboot
- relayConfig
- roleConfig
- routeHelp
- rtLogTrace
- secActiveSize
- secAuthSecret
- secCertUtil
- secDefineSize
- secGlobalShow
- secHelp
- secPolicyAbort
- secPolicyActivate
- secPolicyAdd
- secPolicyCreate
- secPolicyDelete
- secPolicyDump
- secPolicyFCSMove
- secPolicyRemove
- secPolicySave
- secPolicyShow
- secStatsReset
- secStatsShow
- sensorShow
- serDesTuneMode
- setContext
- setDbg
- setVerbose
- sfpShow
- shellFlowControlDisable
- shellFlowControlEnable
- slotPowerOff
- slotPowerOn
- slotShow
- snmpConfig
- snmpTraps
- spinFab
- sshUtil
- statsClear
- stopPortTest
- supportFfdc
- supportFtp
- supportInfoClear
- supportSave
- supportShow
- supportShowCfgDisable
- supportShowCfgEnable
- supportShowCfgShow
- switchBeacon
- switchCfgPersistentDisable
- switchCfgPersistentEnable
- switchCfgSpeed
- switchCfgTrunk
- switchDisable
- switchEnable
- switchName
- switchShow
- switchStatusPolicySet
- switchStatusPolicyShow
- switchStatusShow
- switchUptime
- switchViolation
- syslogdFacility
- syslogdIpAdd
- syslogdIpRemove
- syslogdIpShow
- sysMonitor
- sysShutDown
- tempShow
- thConfig
- thMonitor
- timeOut
- topologyShow
- traceDump
- trunkDebug
- trunkShow
- tsClockServer
- tsTimeZone
- turboRamTest
- upTime
- uRouteShow
- usbStorage
- userConfig
- version
- wwn
- wwnAddress
- zone
- zoneAdd
- zoneCreate
- zoneDelete
- zoneHelp
- zoneObjectCopy
- zoneObjectExpunge
- zoneObjectRename
- zoneObjectReplace
- zoneRemove
- zoneShow
- Primary FCS Commands
- Command Availability
Fabric OS Command Reference 705
53-1003131-01
portCfg
2
To view the IPsec policy status for the Brocade 7840 switch:
switch:admin> portshow ipsec-policy all --ike
IPsec Policy OpStatus IKECnt Pre-Shared Key
IKE-ID OpStatus RefCnt Local IP Address Remote IP Address
-------------------------------------------------------------------------
myPolicy1 NotInUse 0 some test key
FUNCTION Configure tunnels, circuits, and management interfaces on the Brocade 7800 and Brocade 7840
switches and Brocade FX8-24 blade.
SYNOPSIS portcfg action [slot/]ve_port options arguments
DESCRIPTION Use this command to configure FCIP tunnels and FCIP circuits on the GbE/10GbE ports on the Brocade
7800 and Brocade 7840 switches, and FX8-24 platforms only and to configure the inband management
on these platforms. The FCIP tunnels on the local and remote GbE ports act as Virtual E_Ports
(VE_Ports) connecting the local and remote fabrics. The following operations can be performed with this
command:
• portcfg fciptunnel - Create, modify, and delete Fibre Channel over IP (FCIP) tunnels.
- Configure a tunnel with the FCIP FastWrite feature.
- Enable or disable Tape Pipelining.
- Configure the compression options.
- Configure an IPsec-enabled tunnel.
- Configure VLAN tagging on the default FCIP circuit. This option is supported on Brocade 7800
switch and FX8-24 blade only.
- Configure Differentiated Services Code Point (DSCP) markings.
- Set the committed rate or minimum and maximum rates for the default circuit.
- Configure a tunnel for FICON emulation.
• portcfg fcipcircuit - Create, modify, and delete additional FCIP circuits.
- Set or modify the committed rate or minimum and maximum rates for the circuit.
- Configure or change VLAN tagging on the default circuit.
- Set or modify additional circuit parameters.
• portcfg mgmtif - Configure the inband management interfaces.
• portcfg mgmtroute - Configure the routes for the inband management interfaces.
• portcfg autoneg - Enable or disable autonegotiation settings for 1GbE ports.
NOTES You can configure up to 20 FCIP tunnels on the Brocade FX8-24 and up to 8 tunnels on the Brocade
7800.
OPERANDS This command has the following operands:
slot
For bladed systems only, specifies the slot number of the port to be configured,
followed by a slash (/).
ve_port
Specifies the number of the VE_Port associated with the tunnel configured on one
of the GbE/10GbE ports to be configured. The VE_Ports are numbered 16-23 on
the Brocade 7800.
fciptunnel
Creates, modifies, or deletes a Fibre Channel over IP (FCIP) tunnel.