Reference (Supporting Fabric OS v7.3.0) Owner manual

Fabric OS Command Reference 1125
53-1003131-01
switchShow
2
1204 8 52 1 ------ -- 16G No_Module FC
1205 8 53 1 ------ -- 16G No_Module FC
1206 8 54 9 ------ -- 16G No_Module FC
1207 8 55 9 ------ -- 16G No_Module FC
1208 8 56 8 ------ id 16G No_SigDet FC
1209 8 57 8 ------ id 16G No_SigDet FC
1210 8 58 0 ------ -- 16G No_Module FC
1211 8 59 0 ------ -- 16G No_Module FC
1212 8 60 0 ------ -- 16G No_Module FC
1213 8 61 0 ------ -- 16G No_Module FC
1214 8 62 8 ------ id 16G No_SigDet FC
1215 8 63 8 ------ id 16G No_SigDet FC
To display media type information (relevant output excerpts only):
• The following example shows switchshow output for the ge0 and ge1 ports on a Brocade 7800.
The ge0 port is a copper port (default). The ge1 has an SFP installed (copper or optical):
[...]
ge0 cu 1G No_Sync FCIP Copper
ge1 id 1G No_Light FCIP
ge2 -- 1G No_Module FCIP
ge3 -- 1G No_Module FCIP
ge4 id 1G Online FCIP
ge5 -- 1G No_Module FCIP
[...]
• This example shows switchshow output for a Brocade 5100. Port 31 has an SFP installed. Nothing
is installed on Port 32.
[...]
31 31 421f00 id N4 In_Sync FC Disabled
32 32 422000 -- N8 No_Module FC Disabled
[...]
• The sfpShow output for the same switch displays the serial number for the SFP.
[...]
Port 31: id (sw) Vendor: BROCADE Serial No: UAF1081800000MK
Speed: 200,400,800_MB/s
Port 32: --
[...]
To display output when an authentication fails for a reason and the port gets disabled:
[...]
15 15 id N2 No_Light Disabled (Authentication Required)
[...]
To display the neighbor switch WWN for the segmented ISLs during ELP and post ELP:
switch:admin> switchshow
switchName: swd77
switchType: 71.2
switchState: Online
switchMode: Native
switchRole: Principal
switchDomain: 1
switchId: fffc01
switchWwn: 10:00:00:05:1e:a2:ec:9c
zoning: OFF
switchBeacon: OFF