Reference (Supporting Fabric OS v7.3.0) Owner manual

Fabric OS Command Reference 1001
53-1003131-01
secCertUtil
2
EXAMPLES To generate a public/private key pair in interactive mode:
switch:admin> seccertutil genkey
Generating a new key pair will automatically do the following:
1. Delete all existing CSRs.
2. Delete all existing certificates.
3. Reset the certificate filename to none.
4. Disable secure protocols.
Continue (yes, y, no, n): [no] y
Select key size [1024 or 2048]: 1024
Generating new rsa public/private key pair
Done.
To generate a public/private key pair in noninteractive mode:
switch:admin> seccertutil genkey -nowarn -keysize 1024
Generating new rsa public/private key pair
Done.
To generate a CSR in interactive mode:
switch:admin> seccertutil gencsr
Country Name (2 letter code, eg, US):US
State or Province Name (full name, \
eg, California):California
Locality Name (eg, city name):"San Jose"
Organization Name (eg, company name):Brocade
Organizational Unit Name (eg, department \
or section name): IT
Common Name (Fully qualified Domain Name, \
or IP address):192.168.38.206
generating CSR, file name is: 192.168.38.206.csr
Done
To generate a CSR in noninteractive mode:
switch:admin> seccertutil gencsr -country US \
-state California -locality "San Jose" \
-org Brocade -orgunit software -cn 192.168.38.206
generating CSR, file name is: 192.168.38.206.csr
Done
To delete the CSR in interactive mode:
switch:admin> seccertutil delcsr
WARNING!!!
About to delete CSR: /etc/fabos/certs/sw0/10.20.5.82.csr
ARE YOU SURE (yes, y, no, n): [no] y
To delete a CSR in noninteractive mode:
switch:admin> seccertutil delcsr -nowarn