Reference (Supporting Fabric OS v7.3.0) Owner manual

986 Fabric OS Command Reference
53-1003131-01
relayConfig
2
relayConfig
Sets and displays the relay host IP address.
SYNOPSIS relayconfig --config -rla_ip relay_ip
-rla_dname domain_name
relayconfig --delete
relayconfig --show
relayconfig --help
DESCRIPTION Use this command to configure or display the relay host that is used to send the Monitoring and Alerting
Policy Suite (MAPS) e-mail notifications. You can configure the e-mail recipients using the mapsConfig
--emailcfg command.
For an e-mail alert to function correctly, add the CP0 and CP1 IP addresses and host names to DNS and
also set the domain name and name server. The ipAddrShow and dnsConfig commands can be used
to set and verify this information.
NOTES This command requires a Fabric Vision license.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS This command has the following operands:
--config
Sets the relay host IP address and domain name.
-rla_ip relay_ip
Specifies the IP address of the relay host.
-rla_dname domain_name
Specifies the domain name of the relay host.
--delete
Deletes the relay host configuration.
--show
Displays the relay host configuration.
--help
Displays the command usage.
EXAMPLES To set relay host IP address:
switch:admin> relayconfig --config -rla_ip 10.70.212.168 \
-rla_dname "mail.brocade.com"
To display the relay host configuration:
switch:admin> relayconfig --show
Relay Host: 10.70.212.168
Relay Domain Name: mail.brocade.com