Hardware Reference Manual (Supporting Fabric OS v6.1.1_enc) User guide

34 Brocade Encryption Switch Hardware Reference Manual
53-1001117-02
A
Power specifications
The power supplies are universal and capable of functioning worldwide without voltage jumpers or
switches. They meet IEC 61000-4-5 surge voltage requirements and are autoranging in terms of
accommodating input voltages and line frequencies. Each power supply has a built-in fan for
cooling, pushing air towards the port side of the switch.
Table 5 lists the power specifications for the switch.
Data transmission ranges
Table 6 provides the data transmission ranges for different cable types and port speeds.
NOTE
The full range of 1, 2, 4, and 8 Gbps can only be achieved by a combination of 4 Gbps SFPs (1, 2,
and 4 Gbps) and 8 Gbps SFP+ (2, 4, and 8 Gbps).
TABLE 5 Power specifications
Specification Value
Input voltage 100 - 240 VAC, universal
Input line frequency 47 - 63 Hz
System power consumption 285 Watts nominal
TABLE 6 Supported optics, speeds, cables, and distances
Transceiver type Form factor Speed Multimedia
(62.5 um)
(OM1)
Multimedia
(50 um)
(OM2)
Multimedia
(50 um)
(OM3)
Single Mode Media
(9 um)
SFP 1 Gbps 300 m 500 m 860 m N/A
SW SFP/SFP+ 2 Gbps 150 m 300 m 500 m N/A
SFP/SFP+ 4 Gbps 70 m 150 m 380 m N/A
SFP+ 8 Gbps 21 m 50 m 150 m N/A
SFP 2 Gbps N/A N/A N/A 30 km
LW SFP 4 Gbps N/A N/A N/A 30 km
SFP+ 8 Gbps N/A N/A N/A N/A