Hardware Installation Guide User Manual

4 Brocade 6910 Ethernet Access Switch Hardware Installation Guide
53-1002650-02
1
Description of Hardware
Description of Hardware
The Brocade 6910 switches consist of two model types, one hardened for extended temperature
range environments, the other non-hardened for standard temperature range environments:
• Standard temperature range switches for 0 to +55 °C:
• BR-6910-EA-AC
• BR-6910-EA-DC
• Extended temperature range switches for -40 to +65 °C:
• BR-6910-EA-H-AC
• BR-6910-EA-H-DC
SFP Slots
The 12 Small Form Factor Pluggable (SFP) transceiver slots are shared with 12 RJ-45 ports. In its
default configuration, if an SFP transceiver (purchased separately) is installed in a slot and has a
valid link on its port, the associated RJ-45 port is disabled and cannot be used. The switch can also
be configured to force the use of an RJ-45 port or SFP slot, as required.
There are two types of SPF transceivers - one hardened that can operate at temperatures between
-40 to +65 °C, and non-hardened that can operate at temperatures between 0 to +55 °C.
The SFP slots support the following SFP transceivers:
• Standard temperature range optics (0 to +55 °C)
• 100Base-FX-IR
• 100Base-FX-LR
• 1000Base-SX (OM) 33210-100
• 1000Base-LX (OM) 33211-100
• 1000Base-LHA (OM) 33212-100
• 1000Base-LHB 33004-000
• 1000Base-BXU 33006-000
• 1000Base-BXD 33005-000
• 1000Base-CWDM
• Extended temperature range optics (-40 to +65 °C)
• 1000Base-SX (OM)
• 1000Base-LX (OM)
• 1000Base-LHA (OM)
For information on the recommended standards for fiber optic cabling, see “Fiber Optic Devices”
on page 24.