Configuration Guide (Supporting R2.2.0.0) Owner's manual

924 Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002651-02
42
IP Source Guard
• MAC Address – A valid unicast MAC address.
• IP Address – A valid unicast IP address, including classful types A, B or C.
Show
• VLAN – VLAN to which this entry is bound.
• MAC Address – Physical address associated with the entry.
• Interface – The port to which this entry is bound.
• IP Address – IP address corresponding to the client.
• Lease Time – The time for which this IP address is leased to the client. (This value is zero for all
static addresses.)
Interface
To configure static bindings for IP Source Guard:
1. Click Security, IP Source Guard, Static Configuration.
2. Select Add from the Action list.
3. Enter the required bindings for each port.
4. Click Apply
FIGURE 233 Configuring Static Bindings for IP Source Guard
To display static bindings for IP Source Guard:
1. Click Security, IP Source Guard, Static Configuration.
2. Select Show from the Action list.
FIGURE 234 Displaying Static Bindings for IP Source Guard