Configuration Guide (Supporting R2.2.0.0) Owner's manual
852 Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002651-02
42
AAA Authentication, Authorization and Accounting
Interface
To configure the parameters for RADIUS or TACACS+ authentication:
1. Click Security, AAA, Server.
2. Select Configure Server from the Step list.
3. Select RADIUS or TACACS+ server type.
4. Select Global to specify the parameters that apply globally to all specified servers, or select a
specific Server Index to specify the parameters that apply to a specific server.
5. To set or modify the authentication key, mark the Set Key box, enter the key, and then confirm
it
6. Click Apply.
FIGURE 169 Configuring Remote Authentication Server (RADIUS)
FIGURE 170 Configuring Remote Authentication Server (TACACS+)