Configuration Guide (Supporting R2.2.0.0) Owner's manual

830 Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002651-02
40
Configuring a Class Map
To edit the rules for a class map:
1. Click Traffic, DiffServ.
2. Select Configure Class from the Step list.
3. Select Add Rule from the Action list.
4. Select the name of a class map.
5. Specify type of traffic for this class based on an access list, a DSCP or IP Precedence value, or
a VLAN. You can specify up to 16 items to match when assigning ingress traffic to a class map.
6. Click Apply.
FIGURE 156 Adding Rules to a Class Map
To show the rules for a class map:
1. Click Traffic, DiffServ.
2. Select Configure Class from the Step list.
3. Select Show Rule from the Action list.
FIGURE 157 Showing the Rules for a Class Map