Configuration Guide (Supporting R2.2.0.0) Owner's manual

666 Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002651-02
32
Navigating the Web Browser Interface
Periodic
Sets a recurrent time 883
Show Rule
Shows the time specified by a rule 883
Configure ACL
886
Show TCAM
Shows utilization parameters for TCAM 885
Add
Adds an ACL based on IP or MAC address filtering 886
Show
Shows the name and type of configured ACLs 886
Add Rule
Configures packet filtering based on IP or MAC addresses and other
packet attributes
886
Show Rule
Shows the rules specified for an ACL 886
Configure Interface
Configure
Binds a port to the specified ACL and time range 897
Add Mirror
MIrrors matching traffic to the specified port 898
Show Mirror
Shows ACLs mirrored to specified port 898
Show Hardware Counters
Shows statistics for ACL hardware counters 900
ARP Inspection 901
Configure General
Enables inspection globally, configures validation of additional address
components, and sets the log rate for packet inspection
901
Configure VLAN
Enables ARP inspection on specified VLANs 903
Configure Interface
Sets the trust mode for ports, and sets the rate
limit for packet inspection
904
Show Information
Show Statistics
Displays statistics on the inspection process 905
Show Log
Shows the inspection log list 907
IP Filter 907
Add
Sets IP addresses of clients allowed management access via the web,
SNMP, and Telnet
907
Show
Shows the addresses to be allowed management access 907
Port Security Configures per port security, including status, response for security
breach, and maximum allowed MAC addresses
909
Port Authentication IEEE 802.1X 911
Configure Global
Enables authentication and EAPOL pass-through 912
Configure Interface
Sets authentication parameters for individual ports 914
Show Statistics
Displays protocol statistics for the selected port 919
IP Source Guard Filters IP traffic based on static entries in the IP Source Guard table, or
dynamic entries in the DHCP Snooping table
921
Port Configuration
Enables IP source guard and selects filter type per port 921
Static Binding
923
Add
Adds a static addresses to the source-guard binding table 923
TABLE 153 Switch Main Menu (Continued)
Menu Description Page