Configuration Guide (Supporting R2.2.0.0) Owner's manual

Brocade 6910 Ethernet Access Switch Configuration Guide 663
53-1002651-02
32
Navigating the Web Browser Interface
Auto Traffic Control Sets thresholds for broadcast and multicast storms which can be used to
trigger configured rate limits or to shut down a port
810
Configure Global
Sets the time to apply the control response after traffic has exceeded the
upper threshold, and the time to release the control response after traffic
has fallen beneath the lower threshold
811
Configure Interface
Sets the storm control mode (broadcast or multicast), the traffic
thresholds, the control response, to automatically release a response of
rate limiting, or to send related SNMP trap messages
812
Priority
Default Priority
Sets the default priority for each port or trunk 815
Queue
Sets queue mode for the switch; sets the service weight for each queue
that will use a weighted or hybrid mode
816
Trust Mode
Selects DSCP or CoS priority processing 821
DSCP to DSCP
822
Configure
Maps DSCP values in incoming packets to per-hop behavior and drop
precedence values for internal priority processing
822
Show
Shows the DSCP to DSCP mapping list 822
CoS to DSCP
824
Configure
Maps CoS/CFI values in incoming packets to per-hop behavior and drop
precedence values for priority processing
824
Show
Shows the CoS to DSCP mapping list 824
PHB to Queue
819
Configure
Maps internal per-hop behavior values to hardware queues 819
Show
Shows the PHB to Queue mapping list 819
DiffServ 827
Configure Class
828
Add
Creates a class map for a type of traffic 828
Show
Shows configured class maps 828
Modify
Modifies the name of a class map 828
Add Rule
Configures the criteria used to classify ingress traffic 828
Show Rule
Shows the traffic classification rules for a class map 828
Configure Policy
831
Add
Creates a policy map to apply to multiple interfaces 831
Show
Shows configured policy maps 831
Modify
Modifies the name of a policy map 831
Add Rule
Sets the boundary parameters used for monitoring inbound traffic, and
the action to take for conforming and non-conforming traffic
831
Show Rule
Shows the rules used to enforce bandwidth policing for a policy map 831
Configure Interface
Applies a policy map to an ingress port 839
TABLE 153 Switch Main Menu (Continued)
Menu Description Page