Configuration Guide (Supporting R2.2.0.0) Owner's manual
662 Brocade 6910 Ethernet Access Switch Configuration Guide
53-1002651-02
32
Navigating the Web Browser Interface
Show
Displays the configuration settings for VLAN translation 777
MAC Address 779
Static 779
Add
Configures static entries in the address table 779
Show
Displays static entries in the address table 779
Dynamic
Configure Aging
Sets timeout for dynamically learned entries 781
Show Dynamic MAC
Displays dynamic entries in the address table 782
Clear Dynamic MAC
Removes any learned entries from the forwarding database and clears
the transmit and receive counts for any static or system configured
entries
783
Mirror Mirrors traffic matching a specified source address from any port on the
switch to a target port
783
Spanning Tree 785
Loopback Detection Configures Loopback Detection parameters 787
STA Spanning Tree Algorithm
Configure Global
Configure
Configures global bridge settings for STP, RSTP and MSTP 789
Show Information
Displays STA values used for the bridge 793
Configure Interface
Configure
Configures interface settings for STA 794
Show Inform at on
Displays interface settings for STA 797
MSTP Multiple Spanning Tree Algorithm 799
Configure Global
799
Add
Configures initial VLAN and priority for an MST instance 799
Modify
Configures the priority or an MST instance 799
Show
Configures global settings for an MST instance 799
Add Member
Adds VLAN members for an MST instance 799
Show Member
Adds or deletes VLAN members for an MST instance 799
Show Information
Displays MSTP values used for the bridge 799
Configure Interface
803
Configure
Configures interface settings for an MST instance 803
Show Information
Displays interface settings for an MST instance 803
Traffic
Rate Limit Sets the input and output rate limits for a port 807
Storm Control Sets the broadcast storm threshold for each interface 808
TABLE 153 Switch Main Menu (Continued)
Menu Description Page