Configuration Guide (Supporting R2.2.0.0) Owner's manual

972 Brocade 6910 Ethernet Access Switch Configuration Guide

53-1002651-02

Simple Network Management Protocol

• Number of requested variables – The total number of MIB objects which have been retrieved

successfully by the SNMP protocol entity as the result of receiving valid SNMP Get-Request and

Get-Next PDUs.

• Number of altered variables – The total number of MIB objects which have been altered

successfully by the SNMP protocol entity as the result of receiving valid SNMP Set-Request

PDUs.

• Get-request PDUs – The total number of SNMP Get-Request PDUs which have been accepted

and processed, or generated, by the SNMP protocol entity.

• Get-next PDUs – The total number of SNMP Get-Next PDUs which have been accepted and

processed, or generated, by the SNMP protocol entity.

• Set-request PDUs – The total number of SNMP Set-Request PDUs which have been accepted

and processed, or generated, by the SNMP protocol entity.

• SNMP packets output – The total number of SNMP Messages which were passed from the

SNMP protocol entity to the transport service.

• Too big errors – The total number of SNMP PDUs which were generated by the SNMP protocol

entity and for which the value of the error-status field is “tooBig.”

• No such name errors – The total number of SNMP PDUs which were delivered to, or generated

by, the SNMP protocol entity and for which the value of the error-status field is “noSuchName.”

• Bad values errors – The total number of SNMP PDUs which were delivered to, or generated by,

the SNMP protocol entity and for which the value of the error-status field is “badValue.”

• General errors – The total number of SNMP PDUs which were delivered to, or generated by, the

SNMP protocol entity and for which the value of the error-status field is “genErr.”

• Response PDUs – The total number of SNMP Get-Response PDUs which have been accepted

and processed by, or generated by, the SNMP protocol entity.

• Trap PDUs – The total number of SNMP Trap PDUs which have been accepted and processed

by, or generated by, the SNMP protocol entity.

Interface

To show SNMP statistics:

1. Click Administration, SNMP.

2. Select Show Statistics from the Step list.