Reference Owner manual

Brocade 6910 Ethernet Access Switch MIB Reference 85
53-1002652-02
14
IronWare traps
Traps for stacking
Brocade supports for the following traps for stacking.
snTrapOpticalMonitoringOK
brcdIp.0.1214
snAgGblTrapMessage Informational The SNMP trap that is generated
when an interface transitions from
an error to normal state because
the alarms/warnings are below the
threshold.
Sample Trap Message
Brocade Trap: Optical
Monitoring OK. <ifIndex>;
<property> {high | low}.
Trap Name and Number Varbind Severity Description
snTrapStackingChasPwrSupplyOK
brcdIp.0.166
snChasUnitIndex,
snChasPwrSupplyIndex,
snAgGblTrapMessage
Minor The SNMP trap that is generated
when a power supply operational
status changed from failure to
normal for a stacking system.
Sample Trap Message
System: Stack unit
<unitNumber>
Power supply
<snChasPwrSupplyIndex> is
up
snTrapStackingChasPwrSupplyFailed
brcdIp.0.167
snChasUnitIndex,
snChasPwrSupplyIndex,
snAgGblTrapMessage
Minor The SNMP trap that is generated
when a power supply operational
status changed from normal to
failure for a stacking system.
Sample Trap Message
System: Stack unit
<unitNumber>
Power supply
<snChasPwrSupplyIndex> is
down
snTrapStackingTemperatureWarning
brcdIp.0.171
snChasUnitIndex,
snAgGblTrapMessage
Critical The SNMP trap that is generated
when the actual temperature
reading rises from the falling
threshold and reaches the rising
threshold.
Sample Trap Message
System: Stack unit
<unitNumber> Temperature
<actual-temp> C degrees,
warning level
<warning-temp> C degrees
Trap Name and Number Varbind Severity Description