Reference Owner manual

Brocade 6910 Ethernet Access Switch MIB Reference 77
53-1002652-02
Chapter
13Object for Stacking
In this chapter
•Agent temperature table for stacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Agent temperature table for stacking
The Agent Temperature Table shows temperature information for a module’s temperature sensor in
the Stacking devices.
Name, Identifier, and Syntax Access Description
snAgentTemp2Table
brcdIp.1.1.2.13.2
N/A This table lists the temperature of each unit in the stack.
snAgentTemp2Entry
brcdIp.1.1.2.13.2.1
N/A A row in the unit temperature table.
snAgentTemp2UnitNum
brcdIp.1.1.2.13.2.1.1
Syntax: Integer
N/A The unit number which contains the temperature sensor
represented by this row.
snAgentTemp2SlotNum
brcdIp.1.1.2.13.2.1.2
Syntax: Integer
N/A The slot number of module which contains the temperature
sensor represented by this row. (The value of this object is
always 1.)
snAgentTemp2SensorId
brcdIp.1.1.2.13.2.1.3
Syntax: Integer
N/A The temperature sensor ID of the member module that is
represented by this row.
The first detector is located between the physical layer ASICs
on the main board. The second and third detector are located
on right and left side of daughter board.
snAgentTemp2Value
brcdIp.1.1.2.13.2.1.5
Syntax: Integer
Read only Temperature of the sensor represented by this row. Each unit is
0.5 degrees Celsius.
Values are from -110 to 250.