Reference Owner manual

Brocade 6910 Ethernet Access Switch MIB Reference 69
53-1002652-02
Chapter
11Interfaces
In this chapter
•Switch port information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
•Link Aggregation Group (LAG) table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Switch port information
This chapter presents the objects used to define interfaces on a device. Refer to the configuration
guide for details on the features discussed in this chapter.
The following table contains information about the switch port groups.
Switch port information group
The snSwIfInfoTable contains information about the switch port groups.
Name, Identifier, and Syntax Access Description
snSwIfInfoTable
brcdIp.1.1.3.3.5
N/A The Switch Port Information Table.
snSwIfInfoEntry
brcdIp.1.1.3.3.5
N/A An entry in the snSwIfInfo table indicates the configuration for a
specified port.
snSwIfInfoPortNum
brcdIp.1.1.3.3.5.1.1
Syntax: InterfaceIndex
Read only Shows the port or interface index.
snSwIfInfoTagMode
brcdIp.1.1.3.3.5.1.4
Syntax: Integer
Read-write Indicates if the port has an 802.1Q tag:
• tagged(1) – Ports can have multiple VLAN IDs since these
ports can be members of more than one VLAN.
• untagged(2) – There is only one VLAN ID per port.
• dual(3) – Ports can have multiple VLANs per port.