Reference Owner manual

54 Brocade 6910 Ethernet Access Switch MIB Reference
53-1002652-02
7
TACACS general objects
TACACS general objects
The Terminal Access Controller Access Control System (TACACS) or security protocols can be used
to authenticate the following types of access to devices:
• Telnet access
• SSH access
• Securing Access to Management Functions
• Web management access
• Access to the Privileged EXEC level and CONFIG levels of the CLI
The TACACS and protocols define how authentication, authorization, and accounting information is
sent between a device and an authentication database on a TACACS server.
fdryRadiusServerIndex
brcdIp.1.1.8.1.1.1.1.1
Syntax: Unsigned32
N/A
The index to the RADIUS server table. A maximum of five RADIUS
servers are supported.
fdryRadiusServerAddrType
brcdIp.1.1.8.1.1.1.1.2
Syntax: InetAddressType
Read-create
The RADIUS server IP address type – ipv4(1)
fdryRadiusServerAddr
brcdIp.1.1.8.1.1.1.1.3
Syntax: InetAddress
Read-create The RADIUS server IP address.
fdryRadiusServerAuthPort
brcdIp.1.1.8.1.1.1.1.4
Syntax: Unsigned32
Read-create The authentication UDP port number.
Default: 1812
fdryRadiusServerAcctPort
brcdIp.1.1.8.1.1.1.1.5
Syntax: Unsigned32
Read-create The account UDP port number.
Default: 1813
fdryRadiusServerRowKey
brcdIp.1.1.8.1.1.1.1.6
Syntax: DisplayString
Read-create The authentication key displayed as encrypted text.
Valid values: Up to 64 characters as encrypted text.
fdryRadiusServerRowStatus
brcdIp.1.1.8.1.1.1.1.8
Syntax: RowStatus
Read-create This variable is used to create, or delete a row in this table. When
a row in this table is in active(1) state, no objects in that row can
be modified except this object.
When a row in this table is in active(1) state, the switch supports
writing active(1) or destroy(6), the former of which has no effect,
and the latter of which deletes this entry.
Name, Identifier, and Syntax Access Description