Hardware Reference Manual User guide

Warning:
This is Class A product. In a domestic environment this product may cause radio interference in which
case the user may be required to take adequate measures.
CE statement
ATTENTION
This is a Class A product. In a domestic environment, this product might cause radio interference, and
the user might be required to take corrective measures.
The standards compliance label on the Brocade 300 contains the CE mark which indicates that this
system conforms to the provisions of the following European Council directives, laws, and standards:
• Electromagnetic Compatibility (EMC) Directive 2004/108/EEC
• Low Voltage Directive (LVD) 2006/95/EC
• EN50082-2/EN55024:1998 (European Immunity Requirements)
‐ EN61000-3-2/JEIDA (European and Japanese Harmonics Spec)
‐ EN61000-3-3
Canadian requirements
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations, ICES-003 Class A.
Regulatory certifications
The following table lists the regulatory compliance standards for which the Brocade 300 is certified.
Regulatory compliance standards TABLE 11
Country Standards Agency Certifications and
Markings
Safety EMC Safety EMC
United States Bi-Nat UL/CSA 60950-1
1st Ed or latest
ANSI C63.4 cCSAus FCC Class A and
Statement
Canada Bi-Nat UL/CSA 60950-1
1st Ed or latest
ICES-003 Class A cCSAus ICES A and Statement
Japan CISPR22 and JEIDA
(Harmonics)
VCCI-A and Statement
European Union EN60950-1 or latest EN55022 and EN55024 TUV-GS, N CE marking
Australia, New
Zealand
EN55022 or CISPR22 or
AS/NZS CISPR22
C-Tick mark
CE statement
42 Brocade 300 Hardware Reference Manual
53-1000862-06