Installation guide

c) Save the packing materials in the event you need to return the product.
d) Leave the device on top of the shipping tray and pallet if the device must be transported to
the installation location.
2. Use a pallet jack or other assisted lift to transport the device to the installation area.
3. Using the rack mount instructions, install the rack components in the rack and mounting flanges on
the device. The rack mount kit and instructions are shipped separately from the device.
4. Remove the accessory kit (cardboard box), packing foam, and anti-static plastic from the device
and set them aside.
5. Remove the foam inserts around the base of the device.
6. Use a lift to raise the device to the correct level. If installing the device in a rack, follow the
instructions provided by the rack kit manufacturer.
7. If applicable, lock the wheels of the lift.
8. Ensure that the device is oriented so that the port side (front) has access to intake air.
9. Gently slide the device onto the final installation surface, ensuring that it remains supported during
the transfer.
10.Before you apply power to the device, you can install the management module, switch fabric
module, and line card modules as well as power supplies to speed up your installation.
Port numbering
Use the illustrations provided to understand the port numbering for each line card supported on the
device.
12x40 GbE port numbering
The following illustration shows the 12x40 GbE line card modules. Ports are numbered 1 through 12
from top to bottom when installed in the device.
Port numbering
26 Brocade VDX 8770-8 Hardware Installation Guide
53-1002564-07