Technical data

Brocade VDX 8770-4 Hardware Reference Manual 87
53-1002563-05
Power cords
A
The ports meet all required safety standards. For a listing of these standards, refer to “Regulatory
compliance.”
Power cords
The types of power cords provided with the Brocade VDX 8770-4 are specific to the country where it
is installed. For each of the types of power cords in Table 25, the end that connects to the Brocade
VDX 8770-4 has an IEC 60320/C19 cable connector. The AC power receptacles on each power
supply are equipped with IEC 60320/C20 power connectors.
In order to connect to a power strip already installed in a rack, the C20, 20A-250V, 12 AWG power
cord is required.
To order a power cord, contact your Brocade VDX 8770-4 supplier.
100 GbE CFP2
SR10
Typical 850
(840 min - 860
max)
OM3, OM4 50 OM3 - 100m (328.1 ft)
OM4 - 150m (492.1 ft)
100 GbE CFP2 LR4 WDM
1294.53 - 1296.59
1299.02 - 1301.09
1303.54 - 1305.63
1308.09 - 1310.19
SMF G.652 10 10 km (6.2 mi)
TABLE 24 Supported optics (Continued)
Speed Wavelength Fiber type Cable core diameter
(microns)
Maximum cable distance
TABLE 25 Power cord types (international)
Country Plug style
NEMA 5-20P
125V only
USA, Canada,
Mexico, other
locations
NEMA L6-20
USA, Canada,
Mexico, other
locations
CEE-7/7
“Schuko”
Continental
Europe
BS-1363A AS 3112
Australia/New
Zealand
IEC-60309
32A-6h, 230V~
C20
20A-250V
12 AWG
connect to
in-rack power
strip only
All locations
Argentina XX
Australia XX
Austria X X
Bahrain X X
Belgium X X
Brazil X X X