Technical data

Brocade VDX 6720 Hardware Reference Manual 39
53-1002084-06
Replacing a fan assembly in the Brocade VDX 6720-60
5
FIGURE 17 Inserting the power supply in the Brocade VDX 6720-60
7. Plug the power cord into the power supply to power on the unit.
The power supply will immediately attempt to power up.
8. Verify that the LED on the new power supply displays steady green while the Brocade VDX
6720-60 is operating (see Table 7). If the LED is not steady green, ensure that the power
supply is securely installed and seated properly.
You can enter one of the following commands at the command line prompt to display power
supply status:
• show chassis
• show environment power
Replacing a fan assembly in the Brocade VDX 6720-60
The Brocade VDX 6720-60 has three fan assemblies as displayed in Figure 18. The Network OS
identifies the fan locations from left to right as fan assembly #3, fan assembly #2, and fan
assembly #1.